| Network function | Equipment | What to confirm |
|---|---|---|
| PON access | C600, C650, C620 | Subscriber count, GPON/XGS-PON service cards, uplinks, ONU interoperability, power and redundancy. |
| 1550nm CATV overlay | EYDFA with CWDM | CATV input level, optical power per output, port count and the exact PON pass wavelengths. |
| Optical-to-RF reception | CATV optical receivers | Optical input, AGC range, RF bandwidth/output, number of outputs and installation environment. |
| DWDM transmission | Booster or line amplifier | Channel wavelengths, aggregate versus per-channel power, span loss, gain and required output. |
1. Define the network, not only a model number
Send a simple link diagram and describe the services. A PON access chassis, a CATV EYDFA and a DWDM amplifier are not substitutes for one another. For Chile and Ecuador projects, include the installation site and destination so configuration and shipping can be discussed separately.
2. Check wavelengths and optical budget
List all wavelengths that must pass through the system. Do not assume that equipment labelled PON supports every 10G PON wavelength. Calculate fiber, connector, splice and splitter losses, then compare input/output limits and the required margin. State whether powers are total multiplexed power or per-channel values.
3. Match the installation
Confirm indoor or outdoor use, ambient conditions, rack space, AC/DC supply, connector type and remote management. An outdoor name alone does not establish an IP rating. Verify the environmental specification of the ordered configuration.
4. Prepare a useful quotation request
Include product/model, quantity, network diagram, wavelength/channel plan, optical levels, interfaces, accessories and destination. For PON, add cards, software and ONU requirements. For CATV, add RF levels. Ask sales to confirm current stock and the factory dispatch estimate; transport time depends on the shipping method.
5. Verify before deployment
Confirm the agreed configuration, documentation and acceptance checks before placing the order. Test interoperability and signal levels in the intended network; do not interpret a maximum catalog capacity as the configuration included in every shipment.